Treklo R13 Remote Dimmer Control

A stand-alone wireless remote for our Treklo LED controllers. Use it as a spare, or add one so the lights can be controlled from a second spot. If you need the controller too, look at our starter kits.

Why it works

• Control from multiple areas: Add it as an extra remote so you can control your lighting from either end of your campervan or caravan.
• Expands your V3 setup: Each V3 controller takes up to 10 remotes, and one R13 can run multiple V3 controllers.
• Colour touch slide: Slide your finger to pick any RGB colour, or double-press the on/off key for white.
• Wireless 2.4GHz control: Adjust lighting from up to 30m away in open spaces.
• Long battery life: CR2032 battery delivers up to 1 year of standby.
• Magnetic remote holder: The R13 sits in a magnetic holder, so it's always in the same spot and lifts straight off when you need it.
• Flexible mounting: Stick the holder in place with the included adhesive pad, or screw it to the wall.
• Wide temperature tolerance: Reliable from -30°C to +55°C.

What's in the box

• 1 x R13 Wireless Remote
• 1 x Magnetic Remote Holder
• 1 x Adhesive Pad (for the holder)
• 1 x CR2032 Battery

How it works

The R13 Remote uses a sensitive colour touch slide, allowing you to swipe your finger to pick the exact RGB colour you want. It pairs with the V3 LED Controller, providing wireless brightness and colour control for RGB LED strips across multiple zones.

A short press of the on/off key turns the lights on or off, and a long press (1-6 seconds) adjusts brightness. Slide your finger along the colour touch slide to pick any RGB colour, or fast press the on/off key twice for white (RGB mixed). To extend battery life, the touch slide goes to sleep after 20 seconds without use.

Each V3 can be controlled by up to 10 remotes, and one R13 can be paired with multiple V3 controllers. Auto-transmit on the V3 ensures that if one controller receives a signal, it can forward it to others, maintaining consistent lighting throughout your vehicle or interior setup.

What it suits

• Treklo V3 LED Controller (Brightness + Temp + RGB)
• Treklo V3 + R13 Starter Kit
• RGB LED strips
• 12V/24V LED lighting systems
• Campervans, caravans and RV interiors
• Boats, marine cabins and trailers
• Tiny homes and off-grid lighting setups

Fitting it

Difficulty: 1/5 (Easy). Pair it with your V3, then mount the magnetic holder with the adhesive pad or screws.

Features

• 2.4GHz RF wireless signal
• 30m control distance (open space)
• RGB colour touch slide
• Short press on/off, long press (1-6 seconds) for brightness
• Double-press on/off for white (RGB mixed)
• Touch slide sleeps after 20 seconds to save battery
• CR2032 battery powered
• Magnetic remote holder
• Wall-mount compatible
• Up to 10 remotes per V3 controller

Specifications