Treklo R12 Remote Dimmer Control

A stand-alone wireless remote for our Treklo LED controllers. Use it as a spare, or add one so the lights can be controlled from a second spot. If you need the controller too, look at our starter kits.

Why it works

• Control from multiple areas: Add it as an extra remote so you can control your lighting from either end of your campervan or caravan.
• Expands your V2 setup: Each V2 controller takes up to 10 remotes, and one R12 can run multiple V2 controllers.
• Warm to cool white control: Slide between warm and cool white to suit the time of day or the mood.
• Wireless 2.4GHz control: Adjust lighting from up to 30m away in open spaces.
• Long battery life: CR2032 battery delivers up to 1 year of standby.
• Magnetic remote holder: The R12 sits in a magnetic holder, so it's always in the same spot and lifts straight off when you need it.
• Flexible mounting: Stick the holder in place with the included adhesive pad, or screw it to the wall.
• Wide temperature tolerance: Reliable from -30°C to +55°C.

What's in the box

• 1 x R12 Wireless Remote
• 1 x Magnetic Remote Holder
• 1 x Adhesive Pad (for the holder)
• 1 x CR2032 Battery

How it works

The R12 Remote uses a sensitive touch-slide interface, allowing you to swipe your finger to move your lighting between warm and cool white. It pairs with the V2 LED Controller, providing wireless brightness and colour-temperature control for CCT dual-colour LED strips across multiple zones.

A short press of the on/off key turns the lights on or off, and a long press (1-6 seconds) adjusts brightness. Slide your finger along the touch slide to move between warm and cool white. To extend battery life, the touch slide goes to sleep after 20 seconds without use.

Each V2 can be controlled by up to 10 remotes, and one R12 can be paired with multiple V2 controllers. Auto-transmit on the V2 ensures that if one controller receives a signal, it can forward it to others, maintaining consistent lighting throughout your vehicle or interior setup.

What it suits

• Treklo V2 LED Controller (Brightness + Temp)
• Treklo V2 + R12 Starter Kit
• CCT dual-colour LED strips (warm + cool white)
• 12V/24V LED lighting systems
• Campervans, caravans and RV interiors
• Boats, marine cabins and trailers
• Tiny homes and off-grid lighting setups

Fitting it

Difficulty: 1/5 (Easy). Pair it with your V2, then mount the magnetic holder with the adhesive pad or screws.

Features

• 2.4GHz RF wireless signal
• 30m control distance (open space)
• Warm-to-cool white touch slide
• Short press on/off, long press (1-6 seconds) for brightness
• Touch slide sleeps after 20 seconds to save battery
• CR2032 battery powered
• Magnetic remote holder
• Wall-mount compatible
• Up to 10 remotes per V2 controller
• Compact ergonomic design

Specifications