Grab and Go Fleet Accessory Kit For Starlink Mini

One kit that moves between every vehicle on the job. Utes, vans, 4WDs, tractors, mining vehicles and machinery: if it has a 12V socket, it can run a Starlink Mini. Inside the case you get the Treklo shielded aluminium mount, a Plug and Play cig adapter, a 5m cable and four 3M adhesive discs.

On a steel roof, bonnet or tray the magnets do the work. For fibreglass or aluminium, stick a 3M disc down once and leave it there, then swap the kit from vehicle to vehicle as the work changes.

What's in the kit

• 1 x Treklo Aluminium Shielded Magnet Mount with roof rack hardware
• 1 x Plug and Play cig adapter (IP67 booster)
• 1 x 5m shielded cable
• 1 x Protective carry case (style varies)
• 1 x Set of 4 x 3M adhesive discs
• 1 x Starlink Mini, if you add one

You may also need: Your Starlink Mini (unless you add one).

Getting set up

1. Grab the case. It's all packed and ready to go.
2. Mount up. Magnets straight onto steel, or onto a 3M disc for fibreglass and aluminium.
3. Plug in. Cig adapter into any 12V socket, then the cable to the Mini.
4. Get online. Flick the switch on the adapter and you're connected.

Why it works

• 100kg+ of magnet hold: Four rubber-coated magnets rated at 25kg+ each.
• Clear shield over the dish: RF-transparent, so it protects the Mini without blocking signal.
• Works in any vehicle: The Plug and Play cig adapter only needs a 12V socket.
• Steady 30V: Keeps the Mini at 30V while battery voltage moves around.
• Four 3M discs: For canopies, camper roofs and other non-steel surfaces.
• Carry case: Throw it on the back seat or hand it to the next crew heading out.

1 year warranty, backed by our team in Geelong.