12 Volt Starlink Mini DIY Kit
Spend more, get more
- Aussie warranty1 year, handled locally
- Geelong supportReal people, real answers
- Same day shippingOrder by 3pm AEST
The full rundown
The parts you need to run a Starlink Mini from 12 volts, in one DIY kit. A simple way to get fast internet going in your vehicle or camp setup.
Why it works
- Boosts 12V to 30V: Steps up voltage for reliable Starlink Mini performance.
- Uses your factory cable: Helps prevent annoying voltage dropouts over longer cable runs.
- DIY connection setup: Includes a Starlink Mini DC adapter for custom wiring.
- Designed for 12V systems: Ideal for campervans, caravans, RVs, 4WDs and camping setups.
- Tested power performance: Power consumption has been seen around 20W, with brief spikes to 35W during speed tests.
- Compact power solution: A practical option for users who are comfortable with basic 12V wiring.
What's in the box
- 1 x voltage booster
- 1 x Starlink Mini DC adapter
Fuse and Starlink Mini cable not included.
How it works
This kit takes your 12V input and boosts it up to 30V, which is the voltage Starlink recommends for the Starlink Mini. The included DIY connector allows you to connect directly to your Starlink Mini dish.
You might see other 12V solutions that only offer a short 1m cable. That's because 12 volts does not travel well over longer distances. By stepping the voltage up to 30V, this kit allows you to use the factory Starlink cable without worrying about low voltage dropouts, helping keep you connected with fewer interruptions.
What it suits
- Starlink Mini
- 12V DC power systems
- Campervans, caravans, RVs and motorhomes
- 4WDs, utes, camping setups and off-grid systems
- Factory Starlink Mini cable setups
- DIY 12V electrical installations
Fitting it
Difficulty: 3/5 (Moderate). Basic electrical tools such as a crimper and wire stripper are required. A fuse should be installed before the booster for safe operation.
Features
- 12V to 30V voltage booster
- DIY Starlink Mini DC adapter included
- Supports use of the factory Starlink Mini cable
- Helps reduce low-voltage dropouts
- Suitable for mobile and off-grid Starlink Mini setups
- Tested with power consumption around 20W
- Brief spikes to around 35W during speed tests
- Designed for users comfortable with basic 12V wiring
- Compact DIY power setup
Specifications
| Product Type | DIY Starlink Mini 12V power kit |
| Compatibility | Starlink Mini |
| Input Voltage | 12V DC |
| Output Voltage | 30V DC |
| Power Consumption | Approx 20W observed |
| Peak Power Draw | Brief spikes to approx 35W during speed tests |
| Cable Support | Factory Starlink Mini cable |
| Installation Type | DIY wiring |
| Recommended Protection | Fuse before booster |
| Application | Campervan, caravan, RV, 4WD and off-grid Starlink Mini power |
What owners say
G'day, we're Treklo
We're a handful of blokes in Geelong who spend our weekends in utes, vans and campers. We got sick of 12V gear that gave up a few trips in, so we started making our own and running it in our own rigs first.
Not sure what you need? Flick us an email and one of us will sort you out. No sales script, just straight answers.
-
We run it ourselves
Every bit of gear goes in our own rigs before it goes on the site.
-
Out the door today
Order by 3pm AEST and it leaves Geelong the same day.
-
Sorted here if it plays up
1 year Aussie warranty, handled by us, not a call centre.